How To Carry Out A Professional Roof Inspection

Roof cleaning should be done on a regular basis. To remain waterproof, the roof and upper sections of a house, such as chimneys and parapet walls, must be kept in good condition. A roof inspection can identify any flaws and prevent them from being major issues that can cause significant harm that is expensive to fix. Try this out Plano Roofing

Roofs on older homes should be reviewed on an annual basis. A lot of roof inspection work can be performed from the ground, and you can do it yourself rather than hiring anyone to do it. Begin by taking a general look at your roof from all accessible angles.

A sagging roof, which indicates a defect in the roof structure, is often visible from the street. You’ll also be able to quickly identify any slipped or disjointed tiles. The colour of any unweathered slate on a slate roof suggests a flaw. You may also see the accumulation of moss or lichen, and excessive growth may need to be removed to protect the roof. Don’t forget to inspect the ridge against the sky for any misaligned ridge tiles or holes in the mortar jointing.

After you’ve completed the roof maintenance review from the ground, climb up to inspect your roof. You can either contract a roofing company or do it yourself if you are confident in your abilities. If you do this, operate safely by using a roof ladder or crawl boards.

Begin at the top of each chimney stack and ensure that the chimney pots and the flaunching, i.e. the mortar layer that holds them in place, are in good condition. Then check the brickwork and pointing for frost damaged bricks or broken mortar. Check that the upper edges of the flashings (the strips of lead or aluminium that waterproof the joint between the chimney stack and the roof surface) are firmly held in the mortar between the bricks and that their lower edges lie flat on the roof. If they do not, rain will get in and cause a leak.

Check that all of the tiles in the ridge are secure and mark those that are loose. Inspect valleys (internal angles where two roof slopes meet) as well, looking for slits and tears. Keep debris out of the valleys. If your roof has a verge at the gable, make sure the mortar that forms the verge is in good condition. High winds may raise or dislodge tiles if it is missing or cracked.